Akins, R. E., & Cermak, J. E. (1976). Wind Pressures on Buildings, CER76-77EA-JEC15, Fluid Dynamics and
Diffusion Laboratory, Colorado State University, CO.
Amidpoor, M. (2010). Investigation of Domestic Flueless Space Heaters Effects on Indoor Air Quality,Research Project, Iran: Khaje Nasir University, Department of Mechanical Engineering.
Arens, A. D. (2000). Evaluation of DisplacementVentilation for Use in High-ceiling Facilities, Master’s Thesis, Department of Mechanical Engineering, Massachussets Institute of Technology, Cambridge, USA.
Aynsley, R., Melbourne, W., Vickery, B. (1977). Architectural Aerodynamics, London: Applied Science Publishers, pp. 254.
Castro, I. P., & Robins, A.G. (1977). The Flow around a Surface-Mounted Cube in Uniform and Turbulent
Streams, J. Fluid Mech, 79 (2), 307–335.
Chan, C., & Li, Y. (2001). A Simple Design Method for Mixed-Mode Ventilation Systems in Australian
Carparks, In: Proceedings of the Fourth International Conference on Indoor Air Quality, Ventilation and Energy
Conservation in Buildings, Changsha, China.
Chiu, Y., & Etheridge, D. W. (2007). External Flow Effects on the Discharge Coefficients of Two Types of
Ventilation Opening, Journal of Wind Engineering and Industrial Aerodynamics, 95, 225-252
Foster, A., Barrett, R., James, S. J., & Swain, M. J. (2002). Measurement and Prediction of Air Movement
through Doorways in Refrigerated Rooms. International Journal of Refrigeration, 25, 1102–1109.
Ghali, K., Ghaddar, N. & Ayoub, M. (2007). Chilled Ceiling and Displacement Ventilation System for Energy
Saving: A Case Study, International Journal of Energy Research, 31, 743–759.
Ghobadian, V. (2012). Tarahi Eghlimi. Tehran: Tehran Uni. Ltd.
Groat, L., & Vang, D. (2004). Research Methods in Architecture (A. Einifar, Trans.), a. Tehran: TU Ltd.
Hoang, M. L., Verboven, P., De Baerdemaeker, J., & Nicolaı¨, B. M. (2000). Analysis of Air Flow in a Cold
Store by Means of Computational Fluid Dynamics. International Journal of Refrigeration, 23, 127–140.
Hu, Z., & Sun, D. W. (2000). CFD Simulation of Heat and Moisture Transfer for Predicting Cooling Rate and
Weight Loss of Cooked Ham During Air-blast Chilling Process. Journal of Food Engineering, 46(3), 189–198.
Hussein, M., & Lee, B.E. (1980). An Investigation of Wind Forces on Three Dimensional Roughness Elements
in a Simulated Atmospheric Boundary Layer, BS 55, Department of Building Science, University of Sheffield,
UK.
Jensen True, J.P. Sandberg, M., Heiselberg, P., V. Nielsen, P. (2003). Wind Driven Cross Ventilation
Analysed as a Catchment Problem and as a Pressure Driven Flow, Int. J. Vent. 1, 89–101.
Kasmaei, M. (2011). Eghlim & Memari. Tehran:Khak Ltd.
Kato, S., Murakami, S., Takahashi, T., Gyobu, T.(1997). Chained Analysis of Wind Tunnel Test and
CFD on Cross Ventilation of Large-Scale Market Building, Journal of Wind Engineering and Industrial
Aerodynamics. 67–68, 573–587.
Knoll, B., Phaff, J.C., & de Gids, W.F. (1995). Pressure Simulation Program, in: Proceedings of the 16th AIVC
Conference, Palm Springs, USA, 18–22 September, vol. 1, 233–242.
Kurabuchi, T. Ohba, M., Endo, T., Akamine, Y., & Nakayama, F. (2004). Local Dynamic Similarity Model
of Crossventilation, Part 1: Theoretical Framework. Int.J. Ventilation, 2 (4), 371–382.
Liddament, M.W. (1986). Air Infiltration Calculation Techniques: An Application Guide, AIVC.
Loomans, M., & Mook, F. (1995). Survey on Measuring Indoor Airflows FAGO, Report 95.25.W., Eindhoven University of Technology Sweden.
Mariotti, M., Rech, G., & Romagnoni, P. (1995). Numerical Study of Air Distribution in a Refrigerated
Room. In Proceedings of the 19th International Congress of Refrigeration (1st ed.), (98–105). Den Hague:
International Institute of Refrigeration.
Mirade, P. S., & Daudin, J. D. (1998a). Numerical Simulation and Validation of the Air Velocity Field in a
Meat Chiller. International Journal of Applied Science and Computations, 5(1), 11–24.
Mirade, P. S., Daudin, J. D., & Arnaud, G. (1995). Simulation En Deux Dimensions De L’ae´Raulique De
Deux Tunnels De Re´Frige´Ration Des Viandes. Revue Internationale du Froid, 18(6), 403–412.
Mirade, P. S., Kondjoyan, A., & Daudin, J. D. (2002). Three-dimensional CFD Calculations for Designing
Large Food Chillers. Computers and Electronics in Agriculture, 34, 67–88.
Novoselac, A., & Srebric, J. (2002). A Critical Review on the Performance and Design of Combined Cooled
Ceilings and Displacement Ventilation Systems, Energy and Building, 34, 497–509.
Oakley, G. (2002). A Combined Day Lighting, Passive Stack Ventilation & Solar Heating System, Ph.D. Thesis, University of Nottingham. 57
Rahaei, O. (2014). Effects of Architectural Somatic Variables on Mixed Air Conditioning Systems’ Efficiency
in Industrial Buildings, Armanshahr Architecture & Urban Development Journal, 12, 69-81.
Rees, S.J., & Haves, P. (2001). A Nodal Model for Displacement Ventilation and Chilled Ceiling Systems in Office Spaces, Building and Environment, 36, 753–762.
Sandberg, M. (2003). An alternative view on the theory of cross ventilation, in: The Proceedings of the First International Workshop on Natural Ventilation,Tokyo.
Scott, G. (1994). Computational Fluid Dynamics for the Food Industry. Food Technology InternationalEurope, 49–51.
Scott, G., & Richardson, P. (1997). The Application of Computational Fluid Dynamics in the Food Industry.
Trends in Food Science and Technology, 8, 119–124.
Seifert, J. (2005). Zum Einfluss Von Luftstro Mungen Auf Die Thermischen Und Aerodynamischen Verha Ltnisse In Und An Geba Uden. Dissertation: TU Dresden.
Seifert, j. Li, Y., Axley, J., Rösler, M. (2006).“Calculation of Wind-driven Cross Ventilation in Buildings with Large Openings”, Journal of Wind Engineering and Industrial Aerodynamics, 94, 925–947.
Xia, B., & Sun, D. W. (2002). Applications of computational fluid dynamics (CFD) in the food industry:
a review. Computers and Electronics in Agriculture,34(1–3), 5–24.
Xie, J., Qu, X. H., Shi, J. Y., & Sun, D. W. (2006).Effects of design parameters on flow and temperature
fields of a cold store by CFD simulation. Journal of Food Engineering, 77(2), 355–363.